Pay in installments of $7.14 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 31 - Sep 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bug mesh tent 2P Bug Shelter for Tarp CampingThe Shelter Don't let pesky insects spoil your night. No See Um netting keeps out tiny critters, while the tub floor prevents moisture from below. This net tent for two is designed to pair with our 2P Cirriform Tarp, but it also works with larger a frame style tarps. Multiple doors allow easy entry from both sides, and the front. Multiple entry points from the front or either side. ~8" tub floor. Two interior stash pockets One interior hang loop.
The Shelter
Don't let pesky insects spoil your night. No-See-Um netting keeps out tiny critters, while the tub-floor prevents moisture from below. This net tent for two is designed to pair with our 2P Cirriform Tarp, but it also works with larger a-frame style tarps. Multiple doors allow easy entry from both sides, and the front.
- Multiple entry points from the front or either side.
- ~8" tub-floor.
- Two interior stash pockets
- One interior hang loop.
Fabric We've switched the flooring to a 20D Ripstop Polyester with a Sil/PU coating. The PU coating on the inner face significantly improves puncture resistance and reduces slipperiness over the previous 20D and 40D Silpoly offerings.
Rigging to connect the Bug Shelter to your tarp comes pre-installed. If you want to pitch the shelter without a tarp, you'll need additional guyline for the apexes and six stakes (additional guyline and stakes are not included).
We recommend seam sealing (instructions) the following seams from the inside prior to use: vertical seams at each tub corner (4), seams along the base of the tub's side walls (2). We have tested Gear Aid's Seam Grip +Sil to work with this Sil/PU fabric (not included).
Made in the USA from imported fabric.
Specifications
Shelter Weight:
- Regular Length: 430g | 15.2 oz*
- Long Length: 457g | 16.1 oz*
-
*Does not include weight of stuff sack or rigging.
- Stuff sack: 11.4g | 0.40 oz
Rigging weight:
- 12' x 3/32" shock cord: 17.6g | 0.62 oz
- 2 Mini barrel cordlocks: 1.4g | 0.05 oz
- 2 Mitten hooks: 1.8g | 0.06 oz
- 4 Squeeze hooks: 3.0g | 0.10 oz
- Total: 23.5g | 0.83 oz
Waste:
- Each net-tent produces roughly 4.1 oz (118g) of in-house waste.
Materials:
-
Floor: 20D Silpoly with Sil/PU coating
-
Finished weight: ~1.4 oz/yd2
-Hydrostatic head: >4500mm - Hydrostatic head: ~4000mm
- Coating: Sil/PU mix on outer face, PU on inner face
-
Finished weight: ~1.4 oz/yd2
- Netting: 0.6oz Nylon No-see-um
Dimensions:
- Floor length: Reg: 84" | 213cm // Long: 90" | 228.6cm
- Height at head apex: 44" | 112cm
- Front width: 56" | 142cm
- Height at foot apex: 25" | 64cm
- Rear width: 46" | 117cm
- Tub depth: ~8" | ~20cm
- Floor area: 29ft2 | 2.69m2
- Approx. packed size: 9" x 6" x 3" | 23cm x 15cm x 8cm
Required items:
No additional items are required to pair the 2P Bug Shelter with the 2P Cirriform. The same is true for pairing with most a-frame style tarps, though some setups may benefit from the use of four stakes for staking out the floor.
To pitch the Bug Shelter without a tarp, you will need the following items:
- Front Pole: At least ~46" (~117cm)
-
Rear Pole: At least ~27" (~69cm)
(taller poles are ok) - Front Guyline: ~84" (~210cm)
- Rear Guyline: ~72" (~180cm)
- Stakes: 6
Rigging/Pitching
Included rigging
Your net-tent comes with the following rigging installed. Though configured for pairing with the 2P Cirriform, the rigging will allow for pairing with many other a-frame tarps as well.
- Tops corners of tub: 24" of 3/32" shock cord & squeeze hook at each upper tub corner
- Apexes: 15" (front) & 24" (rear) 3/32" shock cord with mini barrel cordlocks & mitten hooks
Pitching under a tarp (Option 1)
This is the recommended approach for pitching under the 2P Cirriform.
- Pitch the tarp.
- Clip the Bug Shelter's apexes to points above on the tarp.
- Connect the cords at the Bug Shelter's corners to the tarp's corners.
- Adjust the cords at the apexes to raise the Bug Shelter to the desired height.
- Adjust the cords at the tub's corners to pull out the tub.
- If desired, stake the bottom corners of the tub. Otherwise, let the tub hang.
Pitching under a tarp (Option 2)
This is the recommended approach for pitching under larger a-frame tarps.
- Pitch the tarp.
- Clip the Bug Shelter's apexes to points above on the tarp.
- Adjust the cords at the apexes to raise the Bug Shelter to the desired height.
- At each tub corner, clip the squeeze hook to the tie-out at the floors bottom corner. Cord should be adjusted to its maximum length.
- At each tub corner, stake the cord that now connects the upper and lower corners so the cord forms a triangle with the upper and lower tub corners.
Pitching without a tarp
For times when you only need bug protection and no tarp.
- At each tub corner, clip the squeeze hook to the tie-out at the floors bottom corner. Cord should be adjusted to its maximum length.
- At each tub corner, stake the cord that now connects the upper and lower corners so the cord forms a triangle with the upper and lower tub corners.
- Connect a guyline to the cords at each apex.
- Stake out the apex guylines, using a pole near each end to provide height.
- Adjust the guyline length as needed using the cordlocks installed at each apex.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 4
Expensive, but nice
Style: AVR-X4800H
I previously owned a Denon AVR-2808ci since 2008. That model's remote control didn't work well, and all controls were unnecessarily convoluted, so I was hesitant to buy another Denon. The thing that made me give them another chance is that the sound quality was nice, and I was hoping their engineers learned from their mistakes. I'm glad I gave them the chance.
This new model, the AVR-X4800H, also has excellent sound quality; however, unlike the old one I had, the controls on both the receiver itself, and especially on the remote control, are significantly improved. The controls are intuitive, and everything works perfectly.
That alone made me happy with the purchase; however, the ability to run 4k @ 120 hz for video gaming, and with extra HDMI ports they have here, all added to that value quite a bit. Then, in addition to that, the old model I had ran super hot. In fact, so hot, from just basic usage, it fried itself three different times in the span of a couple weeks (during the winter time), and it kept being repaired under warranty, until they replaced the top grate with one that allows more ventilation. However, this new model doesn't appear to suffer from that same issue. It gets pretty warm, but nowhere near what the old one did -- and I'm using the same Bose Surround Sound system with the new one.
That said, as a precaution, I went ahead and ordered an AC Infinity AirCom to put on top of it, to assist with cooling/ventilation, which has worked wonderfully as well. No the tempts on this Denon AVR have never gone above 87 deg, even on a warm room on the third floor during the late spring / summer time.
The other hesitancy I had was the price tag. I only purchased it because it was on a "25% discount", from $2500 down to around $1850. Granted, it was similar when I purchased the other one 15 years ago, but it's just an awful lot of money, in my humble opinion. I would say it was borderline on whether I would buy it for this amount, and if it went up at all, I wouldn't have purchased it. I may not purchase it again for this price, especially if I have one already that is working well -- it was only the wonky one that I already owned, that I just wanted to get rid of, that put more pressure to give them one more chance. With a working device, I probably wouldn't pay these prices again. But, if it were a few hundred dollars cheaper, then I probably would buy it again.
Hopefully this helps someone. It's a great device, just a bit expensive. And, if you get it, I would still recommend getting a top cooling fan for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 13, 2024
★★★★★ 5
Solid Next-Generation AVR.
Style: AVR-X2800H
I bought this for my 2.1 system used for TV (4K with 120 Hz), movies, video games (4K with 120 Hz), turntable, and digital audio. I have previously used Denon, Marantz, and NAD AVRs. I was using an old NAD without HDMI, and I really wanted everything to synch up.
I tried out a stereo receiver since I am only running a 2.1, but I didn't mesh for me. It was fine, but I felt it was lacking especially around multi-channel audio and the lack of an LFE output for the sub.
The 2800H was very intuitive and easy to set up right out of the box. Hooked up to a TV, it runs through everything step-by-step. After the initial setup, I downloaded and ran a firmware update. When I finally got to use my ears, the sound was already superior to what I had from the mid-2000s 60-watt-per-channel NAD AVR with an external Bluetooth/DAC and PCM cable from the TV AND the brand-new, 2023 model HDMI-equipped stereo receiver (that cost me more than the 2800H). After running Audyssey, the sound only got better. Then, I set up my 2 front speakers on a bi-amp setting, utilizing two of my unused channels to drive my woofer and tweeter with discrete power sources.
The eARC and settings makes turning on my TV, PS5, and AVR easier and quicker. I enjoy the fact that I can use any remote to fix the volume so there is always a remote close when we need a quick mute or change in the volume.
I find the HEOS app to be a little clunky, but I am loving it anyway. I can run high-definition audio through streaming, which is a huge improvement from using Apple Airplay 2 or Bluetooth. It also lets me talk on the phone, send and receive messages, etc. without interrupting the music.
Right now, I am still tweaking my settings, but I can definitely say that the sound is really good. Have I heard better? Sure. This isn't an 11-channel receiver with Dirac, a 200 watt-per-channel, high-end "audiophile"-grade component, or a tube amp. It is best at multi-channel audio and does really well for music, especially with a good set of speakers and quality sub with parametric EQ.
My speakers have are low sensitivity (84dB), and the 2800H puts out enough grunt to listen give nuance and life to music in listening position, to bump the music to listen in my kitchen two rooms over, or watch at theater-level volume in my medium-sized living room with 8-foot ceilings. This thing is getting daily use, and it is more than enough to get the job done in style. For what I need, the 2800H is spot on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 9, 2023
★★★★★ 5
High-Quality Wire That’s Worth Every Foot
Size: 14/2 AWG-200 FT, Color: White
The GEARit 14 Gauge Speaker Wire (200 ft, CL2 rated) has been a great addition to my home audio setup. The 14 gauge thickness feels solid and gives me confidence that I’m getting good signal transfer without unnecessary loss, even over long runs.
The CL2 rating is a big plus — it’s reassuring to know this cable is safe and approved for in-wall installation if I ever decide to run speakers through the walls rather than on the surface.
What I like most:
Flexible yet strong — easy to pull through studs and around corners
Clear polarity markings — no guesswork when wiring speakers
Smooth insulation — doesn’t snag or tangle while measuring and cutting
Good value for 200 ft — plenty to cover multiple rooms or channels
Whether you’re doing a DIY install or upgrading your audio system, this speaker wire delivers solid performance and peace of mind. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2026
★★★★★ 5
Quality wires
Size: 14/2 AWG-200 FT, Color: White
My speakers 🔊 are working much better and the sound is a lot better
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Good product
Size: 14/2 AWG-200 FT, Color: White
Exactly what I was looking for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2026